Geer Da K11 flexible waterproof slurry is a two-component acrylic polymer modified cement-based waterproof material, made of cement, graded aggregate and selected additives powder and liquid polymer additives, etc. components. Powder mixed with the additives, the chemical reaction to form a tough flexible waterproof membrane, the membrane of the concrete and mortar with good adhesion can be formed with a solid permanent tight binding prevents the penetration of water. Features Benefits * rich flexibility to adapt to the building structure and to a certain extent a slight vibration displacement * can be applied over damp base surface; * With good weather resistance; * long construction time can; * * short curing time bonding. high strength, water resistance, and cement screed, tile adhesive has a good affinity. * Can prevent carbonate, chloride penetration, prevent pollution and erosion of salt finishes or concrete; * nontoxic. Scope * solid substrates made of concrete, brick, pre-cast body, composed of lightweight bricks; * interior and exterior building walls, floors, such as: tunnels, bridges, basement, roof, kitchen, balcony, bathroom, swimming pools, reservoirs, etc; * seal precast body seams, back strip interface, structural joints, surrounding spout, lightweight porous masonry (carcass must be used to strengthen the process) * Local strengthening treatment, such as tube around the mouth, and other parts of the corner; * Can be used long-term flooding of the site, such as pool and basement. Use (construction) base surface treatment * surface must be flat, solid, clean, no oil, mold release agents, dust and other loose animals; * For larger holes and cracks should be repaired by patching mortar; * panels, boards need specialized treatment after sealing seam for construction; * screws, bolts recommended to use epoxy or similar materials for closure; * Before using K11 flexible waterproof slurry, the base surface must be fully wetted with water, but can not have the plot water; * for porous substrates, especially cement fiberboard, etc., must be done before brushing waterproof slurry, the first for interface treatment. The new concrete pouring concrete pouring all new construction in the former, there should be a curing curing time (usually 14-28 days), to prevent the impact caused by the contraction of concrete early. Old concrete surface Old concrete surface prior to application, you must use strong detergency industrial detergent or degreaser to clean, then rinse with water, dry brushing. All the plaster surface plaster surface before using K11 flexible waterproof slurry should be allowed to fully curing curing (usually 5-7 days). * For a tiny crack crack (less than 2mm), K11 flexible waterproof slurry may be closed; * for cracks greater than 2mm, first with mortar repair; brushing waterproof coating, non-woven fabrics or fiberglass mesh cloth strengthen treatment; * For the joints, placing strips of polyethylene or polypropylene backing material, then use polysulfide, polyurethane sealant or sealant for sealing. Packing 5KG 18KG Packaging Packaging Packaging 10KG 42KG Packing